Rabitə və İnformasiya Texnologiyaları Nazirliyinin elektron xəbər xidməti

Lincoln Laboratory lends a 3-D-printed hand


At MIT Lincoln Laboratory's Technology Office Innovation Laboratory (TOIL), researchers are working to enhance the technology of current 3-D-printed hands by improving the mechanics of finger motion, adding nonelectronic temperature and tactile feedback, and incorporating motorized technologies. The teams hope that their robust designs reach beyond the e-NABLE community to other relevant organizations, such as the Wounded Warrior Project, a nonprofit organization that provides injured military service members with medical and lifestyle support. "There are many people who could benefit from these devices," says TOIL manager David Scott, "so we are using Lincoln Laboratory brainpower to improve the existing models."
 
While the process of building a hand is simple enough that children can participate, the process of designing a hand is much more complex. Led by Scott, researchers Naomi Hachen, Luke Johnson, Keri Mroszczyk, and Samuel VanNoy began their mission to improve upon the existing hands by downloading the current designs and building them in TOIL. The pieces of each hand (e.g., the fingertips and palm) and connective pieces (e.g, the hinge pins and tensioner block) are typically printed with polylactic acid (PLA) plastic, which is a biodegradable thermoplastic that becomes pliable when heated and solid when cooled. Once the pieces are printed, they are assembled according to the design instructions. The fingers are connected to a tensioner block positioned on the back of the wrist via strings that are woven through preprinted holes in the plastic and tied to individual pins. The tensioner block anchors the strings. When users bend their wrists, the elastic strings stretch to create tension that bends the fingers at their joints, forming a grip. When users straighten their wrists, the tension releases, causing the fingers to relax.
 
Although the hands have provided thousands of users with assistive capabilities, the available designs have limitations. For example, each finger is strung and mounted to one tension box, and the fingers move in unison when users flex their wrists. However, when just one finger is obstructed, all fingers become immobile, limiting grip capabilities. Lack of a strong grip can cause a myriad of issues, from preventing children from picking up cups to preventing adults from shaking hands. To address this mobility problem, the team searched for designs that would allow the fingers to close independently so that when one finger comes into contact with an obstacle, the other fingers would continue to move and form a grip. A mechanism known as the whippletree, commonly used in modern agriculture plows, vehicle windshield wipers, and telescopes, may provide a solution. The whippletree structure uses a central joint, or an equalizer, that is connected to linkages. If one link is obstructed — for example, by the edge of a handle — or pulls harder than other links, the central joint pivots to distribute force evenly through each linkage. By implementing the whippletree structure in a hand, tension is redistributed if one finger hits an obstruction, and the other fingers continue to move individually to form a grip. Currently, one design from e-NABLE has a whippletree joint that is used by four fingers. However, the thumb is still connected directly to the tensioner box, so if the thumb is obstructed, the remaining fingers cannot move. To resolve the thumb obstruction, the Lincoln Laboratory team created a whippletree structure that includes pivoting pins for all five fingers, allowing them to move independently.
 
In addition to improving range of motion, the team is adding passive temperature feedback and tactile feedback to the design. "It's important for users to know whether or not a surface is hot," says VanNoy. "If the users detect heat, they can potentially prevent personal injury and hand damage, such as melting." To achieve temperature detection, the researchers add a color-changing filament to the plastic that is used to print each hand. The thermochromic filament immediately changes colors (e.g., from blue to white) when heat is applied to its surface. Therefore, if a hand changes colors, the user knows that the hand is contacting a hot surface.
 
The researchers are also developing a tactile feedback component that they call the "icing on the cake." Still in the design phase, the component would allow users to feel pressure. The design involves adding to the hand flexible tubing that runs from a fingertip to the forearm. Each end of the tubing will include small pockets — one set of pockets will rest on the underside of the 3-D-printed fingertip, and another set will rest on the user's arm. The tubing will be filled with a liquid (the researchers will investigate fluids of different viscosities, such as glycerol, oils, and water). When pressure is applied to the pockets on the fingertip, the fluid will move to the pockets resting on the user's forearm, and she will be able to feel the extra fluid pressing against her skin. "When users grasp an object, they will actually be able to feel how hard they are squeezing with their 3-D-printed hands," says Hachen.





05/09/16    Çap et